Union of India - Act
The Merchant Shipping (Prevention of Pollution by Sewage from Ships) Rules, 2010
UNION OF INDIA
India
India
The Merchant Shipping (Prevention of Pollution by Sewage from Ships) Rules, 2010
Rule THE-MERCHANT-SHIPPING-PREVENTION-OF-POLLUTION-BY-SEWAGE-FROM-SHIPS-RULES-2010 of 2010
- Published on 7 January 2010
- Commenced on 7 January 2010
- [This is the version of this document from 7 January 2010.]
- [Note: The original publication document is not available and this content could not be verified.]
1. Short title and commencement.
2. Definitions.
3. Obligation to prevent pollution of sea by sewage.
4. Surveys.
5. Issue or Endorsement of Certificate.
6. Issue or Endorsement of a Certificate by another Government.
7. Form of Certificate.
- The International Sewage Pollution Prevention Certificate shall be in Form-I and the Indian Sewage Pollution Prevention Certificate shall be in Form-II.8. Duration and validity of certificate.
9. Sewage system.
- Every ship specified in rule 3 which is under obligation to comply with the provisions of these rules shall be equipped with one of the following sewage systems, namely :-10. Standard discharge connection.
| Description | Dimension |
| Outside diameter | 210 mm |
| Inner diameter | According to pipe outside diameter |
| Bolt circle diameter | 170 mm |
| Slots in flange | 4 holes, 18 mm in diameter, equidistantly placedon a bolt circle of the above diameter, slotted to the flangeperiphery with the slot width of 18 mm |
| Flange thickness | 16 mm |
| Bolts and nuts: quantity and diameter: | 4, each of 16 mm in diameter and of suitable length |