Legal Document View

Unlock Advanced Research with PRISMAI

- Know your Kanoon - Doc Gen Hub - Counter Argument - Case Predict AI - Talk with IK Doc - ...
Upgrade to Premium
[Cites 4, Cited by 27]

Supreme Court of India

Union Of India & Ors vs Tata Iron & Steel Co. Ltd., Jamshedpur on 17 December, 1975

Equivalent citations: 1976 AIR 599, 1976 SCR (2)1002, AIR 1976 SUPREME COURT 599, 1976 2 SCC 123, 1976 TAX. L. R. 1454, 1976 2 SCR 1044, 1976 UPTC 214, 1976 UJ (SC) 178

Author: A.N. Ray

Bench: A.N. Ray, M. Hameedullah Beg, Ranjit Singh Sarkaria, P.N. Shingal

           PETITIONER:
UNION OF INDIA & ORS:

	Vs.

RESPONDENT:
TATA IRON & STEEL CO. LTD., JAMSHEDPUR

DATE OF JUDGMENT17/12/1975

BENCH:
RAY, A.N. (CJ)
BENCH:
RAY, A.N. (CJ)
BEG, M. HAMEEDULLAH
SARKARIA, RANJIT SINGH
SHINGAL, P.N.

CITATION:
 1976 AIR  599		  1976 SCR  (2)1002
 1976 SCC  (2) 123


ACT:
     Central Excises  and Salt Act, 1944-Section 3 read with
First Schedule, items 25 and 26-Notification 30/60 dated 1st
March, 1960  in terms  of Rule	8(1) of	 the Central  Excise
Rules, 1944  exempting steel  ingots in	 which duty paid pig
iron  is  used-Interpretation  of  the	Notification-Whether
exemption is  not available  if duty-paid  pig iron is mixed
with other non-duty-paid materials.



HEADNOTE:
     The respondent  manufactures, as part of iron and steel
products, ingot	 moulds and  bottom stools from pig iron for
use in	steel melting  shops. Under  item 25  and 26 and the
first Schedule	to the	Central Excises	 and Salt Act, 1944,
the respondent	paid excise  duty leviable  on "pig iron and
steel ingots" respectively.
     In terms  of Rule	8(1) of	 the Central  Excise  Rules,
1944, by  a notification  No. 30/60,  the Central Government
granted exemption  to steel  ingots falling under item 26 of
the First  Schedule if	produced out of scraps obtained from
duty-paid pig  irons. Since  unserviceable ingot  moulds and
bottom stools  are also scrapped into pieces and remedied in
an admixture  with other  non-duty paid scraps and hot metal
in the manufacture of steel ingots, the respondent claimed a
set off of duty to the extent of duty paid on pig iron being
the remelted  scrap used  in the manufacture of steel ingots
which was  rejected by	the Assistant  Collector of  Central
Excise. The  appeal before  the Collector  of Central Excise
and  the  revision  before  the	 Ministry  of  Finance	were
dismissed, interpreting	 the Notification  No. 30/60  as not
applicable when	 duty-paid pig iron is mixed with other non-
duty materials.
     When  the	 orders	 of   the  Revenue   Authority	were
challenged in  the High	 Court, the  High Court quashed them
holding that (i) the Revenue Authorities fell into the error
of  interpreting   Notification	 No.   30/60  by   confining
exemption to  steel ingots  in which "entirely" "exclusively
or only" duty-paid pig iron is used since on such words were
used in	 the Notification;  and (ii)  the Notification would
have to	 be interpreted	 in a  manner that the statute would
not cast  a burden  twice over the payment of tax unless the
language of  the statute  is so compellingly certain to that
effect.
     Dismissing the appeal by certificate and negativing the
contentions of the appellant that the exemption is given for
virgin pig  iron and  if pig  iron was	used and  thereafter
reduced to  scrap, there could be no exemption in respect of
that scrap  being different  from pig iron and consequential
refund of the duty-paid on pig iron, the Court.
^
     HELD :  (1) The  only question is whether duty-paid pig
iron is used along with non-duty-paid materials. Pig iron is
made out  of iron  ore plus limestone plus coke. Pig iron is
melted and  processed into  ingot moulds  and bottom stools.
Nothing is  added to  pig iron. When ingot moulds and bottom
stools become  unserviceable they  are broken.	This becomes
scrap and  is melted  and used	in the	manufacture of steel
ingots. All  the time  it is  duty-paid pig  iron  which  is
processed into	ingot moulds  and bottom  stools  and  again
broken into  scrap and melted in the making of steel ingots.
[1048 E-F]
     (2)  There	 cannot	 be  double  taxation  on  the	same
article. The analogy of the Revenue of the example of excise
duty on motor cars, in spite of the fact that there was duty
on tyres and duty on metal sheets was misplaced. [1048 G]
     (3) Notification  No. 30/60 granting exemption to duty-
paid pig  iron does  not say  that exemption is granted only
when duty-paid pig iron is used and that
1045
the exemption  would not  be available if duty-paid pig iron
is mixed  with other  non-duty-paid materials. [1048 H, 1049
A]
     (4) The  object of the Notification was to grant relief
by exempting  duty-paid pig  iron. If  the intention  of the
Government were	 to exclude  the exemption  to duty-paid pig
iron when  mixed with other materials, then the Notification
would have  used the  expression "only"	 or "exclusively" or
"entirely" in regard to duty-paid pig iron. [1049 A-B]



JUDGMENT:

CIVIL APPELLATE JURISDICTION : Civil Appeals Nos. 723- 737 of 1971.

From the Judgment and Order dated 18-4-1969 of the High Court of Judicature at Patna in Civil Writ Jurisdiction Case nos. 614 to 626 of 1967.

Shyamla Pappu, Girish Chandra and S. P. Nayar for the Appellants.

G. S. Pathak, J. B. Dadachanji, O. C. Mathur, R. Narain and A. K. Verma (Mrs.) for the Respondent.

The Judgment of the Court was delivered by RAY, C.J. These appeals are by certificate from the judgment dated 18 April, 1969 of the High Court of Patna.

The High Court quashed the orders of the Revenue Authorities dated 7 July, 1967.

The appellants claimed before the Revenue Authority exemption from the payment of duty in respect of duty paid pig iron which was used in the making of steel ingots.

The respondent manufactures iron and steel products. The respondent manufactures ingot moulds and bottom stools from pig iron for use in steel melting shops. The respondent pays Central excise duty on such ingot moulds and bottoms stools in accordance with the provisions contained in section 3 of the Central Excises and Salt Act, 1944 hereinafter referred to as the Act.

Section 3 of the Act is the charging section. Section 3 states that there shall be levied and collected in such manner as may be prescribed duties of excise on all excisable goods other than salt which are produced or manufactured at the rates set forth in the First Schedule.

Prior to the Finance Act 1964 Items No. 25 and 26 in the First Schedule to the Act mentioned pig iron and steel ingot respectively as the description of goods subject to excise duty.

As a result of the Finance Act, 1964 Items No. 25 and 26 were substituted by the following:-

1046
The respondent's case before the Revenue Authorised and also in the High Court in short was this : When ingot moulds and bottom stools become unfit for further use these are scrapped into pieces and remelted in the respondent's steel melting shops in an admixture with other non duty paid scraps and hot metal in the manufacture of steel ingots. The respondent claimed a set off of duty to the extent of duty paid on pig iron being the remelted scrap used in the manufacture of steel ingots.
The respondent based the claim for exemption on Notification No. 30/60 dated 1 March, 1960 issued by the Central Government in terms of Rule 8(1) of the Central Excise Rules, 1944 (hereinafter called the Rules) exempting steel ingots in which duty paid pig iron is used from so much of the duty leviable thereon as is in excess of Rs. 30/- per ton. By notification No. 120 of 1960 dated 1 October, 1960 Notification No. 30/60 was amended by substituting the figures and words "Rs. 29.35 per metric ton" for the words "Rs. 30 per ton".
By Notification No. 75/62 dated 24 April, 1962 the Central Government in exercise of powers conferred by Rule 8(1) of the Rules exempted steel ingots falling under Item 26 of the First Schedule to the Act and specified in Column 2 of the table appended to the notification from so much of the duty of excise leviable thereon as is in excess of duty specified in the corresponding entry in Column 2 of the said table. In column 2 of the said notification the following descriptions and duty appear:
-----------------------------------------------------------
Sl.	       Descriptions		       Duty
No.
-----------------------------------------------------------
1. If produced out of scrap obtained from duty paid pig iron Rs 30 per M.T.
2. If produced out of old iron or steel scrap obtained from duty paid steel ingots or products (75/76) Nil
-----------------------------------------------------------

The rates given in these aforesaid notifications were further amended by Notification No. 22 of 1964 issued on 1 March, 1964. The rates in respect of Notification No. 30/60 dated 1 March, 1960 for the words and figures "Rs. 20.35 per metric ton" the words and figures substituted were "Rs. 20/- per ton".

Duty was realised from the respondent on steel ingots in the making of which duty paid pig iron of rejected ingot moulds and bottom stools was used along with non-duty paid materials. The respondent claimed exemption in respect of duty paid pig iron on rejected moulds and bottom stools used in the making of steel ingots. The claim of the respondent for exemption in respect of duty paid pig iron was rejected by the Assistant Collector of Central excise by his order dated 29 August, 1965.

1047

The respondent filed appeals before the Collector of Central Excise who by order dated 30 July, 1965 dismissed the respondent's appeals.

The respondent thereafter filed a revision petition before the Ministry of Finance under section 36 of the Act. The Government by an order dated 7 July, 1967 rejected the revision petition of the respondent. The Government held that the respondent was not entitled to any exemption under Notification No. 30/60 dated 1 March, 1960 because remelted scrap obtained from unserviceable casting moulds, viz., ingot moulds and bottom stools was used in conjunction with other non duty paid pig iron in the manufacture of steel ingots.

The respondent challenged the orders in the High Court. The High Court quashed the orders of the Revenue Authorities. The High Court held that the Revenue Authorities fell into the error of interpreting Notification No. 30/60 by confining exemption to steel ingots in which "entirely, exclusively or only" duty paid pig iron is used. The High Court held that the words "entirely, exclusively or only" were not used in the notification. The notification exempted steel ingot in which duty paid pig iron was used. The High Court also held that the notification would have to be interpreted in a manner that the statute would not cast a burden twice over for payment of tax on the tax payer unless the language of the statute is so compellingly certain to that effect.

The appellant contended that exemption is given for virgin pig iron and if pig iron was used and thereafter reduced to scrap there could be no exemption in respect of scrap. It was also said on behalf of the appellant that scrap iron was different from pig iron, and, therefore, the refund of the duty paid on pig iron would not arise.

The appellant Government relied on Notification No. 75/62 dated 25 April, 1962 which gave exemption to steel ingots from so much of the duty of excise leviable thereon if produced out of scrap obtained from duty paid pig iron or if produced out of old iron or steel scrap or scrap obtained from duty paid steel ingots or products. The appellant Government relied on Notification No. 75/62 dated 25 April, 1962 for two reasons. First, it was said that the exemption in Notification No. 30/60 dated 1 March, 1960 exempting steel ingot in which duty pig iron is used will not exempt scrap iron which is different from pig iron. Second, Notification No. 75/62 dated 25 April, 1962 gave exemption to scrap iron in cases and when Notification No. 75/62 was rescinded in 1964 no exemption could thereafter be claimed in respect of scrap.

The respondent contended that the appellant all throughout before the Revenue Authorities and the High Court knew and treated the case of the respondent to be a claim for exemption of duty paid pig iron in the manufacture of steel ingots. In paragraphs 5, 6 and 7 of the statement of case of the appellant it is said that the respondent claimed refund of the duty paid on pig iron used in ingot moulds and bottom 1048 stools being the melted scrap in the manufacture of steel ingots. In the revision order of the Revenue dated 7 July, 1967 in paragraphs 4 and 6 it is stated that the claim of the respondent was for duty paid material used in the making of steel ingots. The Revenue Authorities in the said order did not accept the claim of the respondent for exemption on the ground that duty paid pig iron was mixed with non duty paid pig iron.

In paragraph 9 of the affidavit of the Revenue used in the High Court the Revenue said that the various scraps mixed included duty paid and non duty paid scraps. The Revenue referred to rejected ingot moulds and bottom stools as scrap.

The respondent in the affidavit in reply in the High Court stated that the "question for consideration in these writ applications is the rate of duty leviable on steel ingots produced from processed moulds and bottom plates which have already borne a duty". The respondent also stated that the processed mould and bottom plates used in the manufacture of steel ingots are recorded.

The respondent contended that it was never the case of the Revenue that it was scrap in respect of which the respondent wanted exemption. Counsel for the respondent rightly submitted that if the Revenue made that case the respondent would have produced not only affidavit evidence but also evidence of experts to determine the question of fact whether the article, viz., melted ingot mould and bottom stools altered the character of duty paid pig iron.

Counsel for the respondent is right in the contention that the only question here is whether duty paid pig iron is used along with non duty paid materials. There is no dispute that there are materials and data to find out the quantity of duty paid pig iron used. Pig iron is made out of iron ore plus limestone plus coke. Pig iron is melted and processed into ingot moulds and bottom stools. Nothing is added to pig iron. When ingot moulds and bottom stools become unserviceable they are broken. This becomes scrap and is melted and used in the manufacture of steel ingots. The respondent rightly contends that all the time it is duty paid pig iron which is processed into ingot moulds and bottom stools and again broken into scrap and melted in the making of steel ingots.

The High Court rightly held that the contention of the Revenue fails on two broad grounds. First, there cannot be double taxation on the same article. Counsel for the Revenue gave the example of excise duty on motor cars, in spite of the fact that there was duty on tyres and duty on metal sheets. The analogy is misplaced. In such cases the duty is on the end product of motor cars as a whole. The duty on tyres and the duty on metal sheets do not enter the area of duty on motor car. Second, Notification No. 30/60 grants exemption to duty paid pig iron. The High Court rightly said that the Notification does not say that exemption is granted only when duty paid pig 1049 iron is used and that the exemption would not be available if duty paid pig iron is mixed with other non duty paid materials. If the intention of the Government were to exclude the exemption to duty paid pig iron when mixed with other materials then the notification would have used the expression "only" or "exclusively" or "entirely" in regard to duty paid pig iron. The object of the notification was to grant relief by exempting duty paid pig iron.

For these reasons, the judgment of the High Court is affirmed and the appeals are dismissed. Parties will pay and bear their own costs.

S.R.					  Appeals dismissed.
1050