[Cites 0, Cited by 0]
[Entire Act]
State of Haryana - Section
Section 46 in Faridabad Complex Administration Building Rules, 1989
46. Slenderness ratio. Sections 43(2), 57(2)(m).
- Slenderness ratio shall not exceed 12 and reduction in the permissible pressure figure given for slenderness ratio exceeding shall be carried on according to the table given below :-| Slenderness Ratio | Reduction in maximum permissible pressure due toslenderness ratio exceeding six |
| 7 | 10% |
| 8 | 20% |
| 9 | 30% |
| 10 | 40% |
| 11 | 50% |
| 12 | 60% |
| (i) for walls with no lateral support at top | 1½ actual storey height |
| (ii) for walls with no lateral support at top | ¾ actual storey height |
| (iii) piers with no lateral support at top | 2 actual storey height |
| (iv) Piers with lateral support at top | Actual storey height |