Legal Document View

Unlock Advanced Research with PRISMAI

- Know your Kanoon - Doc Gen Hub - Counter Argument - Case Predict AI - Talk with IK Doc - ...
Upgrade to Premium
[Cites 0, Cited by 0] [Entire Act]

Union of India - Section

Section 5 in The Use of low power devices or equipments for indoor applications in the 433 to 434 MHz frequency range (Exemption from Licensing Requirement) Rules, 2012

5. Equipment.

(1)The low power devices or equipments shall be of Equipment Type Approved designed and constructed in such a manner so that the technical parameters shall conform to the limits specified in the Table referred to in rule 3.
(2)The application for obtaining the Equipment Type Approval shall be made to the Central Government in the application format given in Annexure.AnnexureApplication For Equipment Type Approval
Section-A-applicant
1. Name of manufacturing agency applying For equipment typeapproval :  
2. Postal address of manufacturing agency :  
3. Name of product and the product identification (model numberetc..) :  
Section-B-Details of Transmitter
1. Frequency range :  
2. No. of preset switchable channels :  
3. No. of voice / Data / TV Channels(In case of multi-channelequipment) :  
4. Tx-Rx channel separation(In case of Duplex / multi-channelequipment) :  
5. Adjacent channel separation(In case of multi-channelequipment) :  
6. Frequency stability :  
7. Spurious / Harmonic radiations :  
  i. Carrier suppression(In case of carrier suppressedsystems) :  
  ii. Unwanted side band suppression(In case of SSB systems) :  
  iii. 2ndHarmonic radiations :  
  iv. 3rdharmonic radiations :  
8. Max. Frequency Deviation :  
9. Mode of Emission :  
10. Bandwidth of Emission :  
11. Test Tone Deviation :  
12. Base band frequency(In case of multi channel equipment) :  
13. Type of modulation to be required :  
14. Pre-emphasis :  
15. Power out-put(At the input of antenna) :  
16. Any other information :  
Section-C- Details of Receivers
1. Frequency range :  
2. Mode of reception :  
3. Spurious response of receiver :  
4. Sensitivity :  
5. Frequency stability :  
6. (a) Effective noise temperature :  
  (b) Threshold input level :  
7. Intermediate frequency :  
8. De-emphasis :  
9. Selectivity :  
10. Any other particulars :  
Signature of applicantPlace :Date :(Note: Separate application should be submitted for each type of equipment)