DeHaan). In fact, the Fire Service Department produced
several fire reports wherein they themselves have attributed the cause of the
fires to bursting ... examine the aforesaid stance of Kanageswari
(P.W.19) from another dimension. The fire broke out around 3.30 a.m. on
Page
homicidal in nature, the measurement
and dimensions of the noted injuries on the body of the victim
suggested firing from a close range and that ... exit would was almost same in
measure and dimension, therefore, the shot was fired from a
close range. He had stated that, the gunshot injury
this witness on
the point of dimension of the bullet, a doubt is created about
the firing of this bullet from 7.65 mm caliber pistol ... caliber cartridge have a different visible
dimension. He has further stated that on the basis of
dimension, weight and physical observation of the bullet
examined
pistols became sent for
examination to the ballistic expert concerned, besides fired bullet shots/
cartridges also became sent thereto, but yet since there ... Thus, a conclusion can be made that
the dimensions of the fire-arms, examined at the FSL concerned, became not
matched with the khaka/sketch
Shivgan
13/28
5-AO-136-2021.odt
been granted by compromising fire protection
requirements stipulated under Regulation 47(A) of
the DCPR ?
(ii) Whether redevelopment ... empowered to relax the dimensions,
prescribed under the Regulations (except those relating to
FSI), provided, relaxation will not affect health, fire, structural
and public safety
Fire arm injury wound to second injury left side of face 0.5 intimate 7 c.m. from top of nose left side.
(iii) Fire ... blacking over left eye.
(v) Fire arm injury wound 0.5 c.m. indramis swelling of 2 c.m. in dimension wound axis to wound
State vs 1) Harish Dagar on 23 November, 2022
FIR No. 48/2011 P.S
Pawan Kumar Pandey @ Bablu And Others vs State Of U.P. on 30 May, 2022
height and
dimensions of the rooms and doors;
(iii) the suitability of the exits to be used in
the case of fire; and
(iv) such ... such machinery or manufacturing plant shall be
of such height and dimensions as the
Commissioner may determine.
(7) More than nine workers shall
height and
dimensions of the rooms and doors;
(iii) the suitability of the exits to be used in
the case of fire; and
(iv) such ... such machinery or manufacturing plant shall be
of such height and dimensions as the
Commissioner may determine.
(7) More than nine workers shall
