following characteristics :
(1) Flash point is above 25 ° C.
(2) Smoke point is above 18 mm.
(3) It has final boiling point not exceeding ... excluding mineral colza oil and turpentine substitute) which has a smoke point boiling point not exceeding three hundred degrees of Centigrade thermometer -
(i) Aviation Turbine
Percent recovered below 2000C, percent (v/v),Min
20
20
(b) Final boiling point,0C,Max
300
300
Flash point (Abel
Percent recovered below 2000C, percent (v/v),Min
20
20
(b) Final boiling point,0C,Max
300
300
Flash point (Abel
Minimum 20
B. Final Boiling Point Maximum 300°C
C. Flash Point Minimum 35
D. Smoke Point Minimum 10MM.
The learned Senior Departmental Representative, further ... same i.e. (i) smoke point 18 MM or more, (ii) final boiling point not exceeding 300°C; that since the impugned product LARO confirms
memo was to ascertain
"Nature, Composition, Description of Goods, Initial Boiling Point, Final
Boiling Point, Percentage of Volume (including losses) Distillation at
210c Flash ... boiling point, 300 252
degree C, Max
D) Dry Point, degree C - 250
3. Flash Point (Abel), degree 35 44
C, Min.
4. Smoke Point
Aviation Turbine Fuel with reference to the smoke point and final boiling point prescribed therein for the product as revealed from the test report ... smoke point of eighteen millimeters or more and has a final boiling point not exceeding 300°C:
2710.2 - Aviation turbine fuel."
The characteristics that
abovementioned two reports that one of the tests conducted
was the final boiling point of the sample drawn. It appears from
the abovementioned two documents ... that the final boiling point
was found to be 220o C and 224o C respectively by the
abovementioned two agencies. Pursuant to such a result
tested in the Quality Control Laboratory at Irumpanam failed
in Final Boiling Point, as the test result is found outside the
reproducible/permissible limits with ... seen that the allegation with reference
to the Final Boiling Point is not correct, as the same is within the
permissible limits. It is submitted
laboratory test results
MS sample failed in RON and Final Boiling Point test.
2. By the said order the petitioner was called upon to file ... petrol) both failed in RON (Research Octane
5
Number) and final boiling point test. The respondents,
thereafter, issued a fact finding letter informing that
Flash Point = 46oC
iv. Acidity (inorganic) = Nil
v. Smoke Point = 23 mm
vi. Ash Content = Nil
vii. Initial Boiling Point = 150.08oC
viii. Volume distilled ... More than 40%
ix. 90 % Distilled at = 236.02oC
x. Final Boiling Point = 248.9oC
16.1.2. The Appellant submits that the aforesaid reliance placed
