following characteristics :
(1) Flash point is above 25 ° C.
(2) Smoke point is above 18 mm.
(3) It has final boiling point not exceeding ... excluding mineral colza oil and turpentine substitute) which has a smoke point boiling point not exceeding three hundred degrees of Centigrade thermometer -
(i) Aviation Turbine
Minimum 20
B. Final Boiling Point Maximum 300°C
C. Flash Point Minimum 35
D. Smoke Point Minimum 10MM.
The learned Senior Departmental Representative, further ... same i.e. (i) smoke point 18 MM or more, (ii) final boiling point not exceeding 300°C; that since the impugned product LARO confirms
memo was to ascertain
"Nature, Composition, Description of Goods, Initial Boiling Point, Final
Boiling Point, Percentage of Volume (including losses) Distillation at
210c Flash ... boiling point, 300 252
degree C, Max
D) Dry Point, degree C - 250
3. Flash Point (Abel), degree 35 44
C, Min.
4. Smoke Point
Aviation Turbine Fuel with reference to the smoke point and final boiling point prescribed therein for the product as revealed from the test report ... smoke point of eighteen millimeters or more and has a final boiling point not exceeding 300°C:
2710.2 - Aviation turbine fuel."
The characteristics that
Flash Point = 46oC
iv. Acidity (inorganic) = Nil
v. Smoke Point = 23 mm
vi. Ash Content = Nil
vii. Initial Boiling Point = 150.08oC
viii. Volume distilled ... More than 40%
ix. 90 % Distilled at = 236.02oC
x. Final Boiling Point = 248.9oC
16.1.2. The Appellant submits that the aforesaid reliance placed
Flash Point = 46oC
iv. Acidity (inorganic) = Nil
v. Smoke Point = 23 mm
vi. Ash Content = Nil
vii. Initial Boiling Point = 150.08oC
viii. Volume distilled ... More than 40%
ix. 90 % Distilled at = 236.02oC
x. Final Boiling Point = 248.9oC
16.1.2. The Appellant submits that the aforesaid reliance placed
point-41 degree Celsius, aniline point-44 degree Celsius, initial boiling point
M/s.M.M. Trading Company
2.2 (IBP) 158 degree Celsius, and final ... Mineral Hydrocarbon oil having the following
compositions:
i. Initial boiling 158°C
ii. Final boiling point 212°C
iii. Flash Point 41°C
iv. Density
Degree C) - 180
95% (v/v) Recorded at (Degree C) - 184
Final Boiling Point (degree C) - 196
Aniline point (degree) - 84
"The above tested ... Degree C) - 181
95% (v/v) Recorded at (Degree C) - 186
Final Boiling Point (degree C) - 198
Aniline point (degree) - 84
"The above tested
that the Learned
Adjudicating Authority merely relied upon 2 parameters namely, Final Boiling
Point (Maximum) and Flash Point (Minimum) to hold that goods are Superior ... parameters (Distillation, Flash Point and Smoke
Point). Out of this, Learned Adjudicating Authority has cited only 02
Parameters (Final Boiling Point and Flash Point
Flash Point (Abel)
(v) Class of Petroleum Product (A, B or C)
(vi) Distillation Range i.e. Initial Boiling Point and Final Boiling Point ... Boiling Point mentioned
in the IS Standards 1745 are only the minimum and Maximum
boiling points. As per the test Reports the Initial Boiling Point
