Legal Document View

Unlock Advanced Research with PRISMAI

- Know your Kanoon - Doc Gen Hub - Counter Argument - Case Predict AI - Talk with IK Doc - ...
Upgrade to Premium
[Cites 0, Cited by 0] [Entire Act]

Union of India - Section

Section 7 in The Merchant Shipping (Examination Of Engineers In The Merchant) Navy Rules, 1963

7. Service as Apprentice Engineer or Fitter.

- A candidate must have performed satisfactory service for not less than four years as apprentice engineer or eight years as fitter (including apprenticeship in the trade) on work suitable for the training of a marine engineer in the manufacture or maintenance of machinery. Not less than one of these four years' workshop service required as apprentice engineer should have been devoted to fitting, erecting or repairing machinery of a suitable size or description (e.g., work on marine engines, substantial auxiliary machinery and steering gears of a type fitted in ships, or on motive power machinery which has a similar value in the training of marine engineers) either in the works or outside; the remaining three years as apprentice engineer may have been spent on work of this nature or on other suitable work, subject to a time allowance for each type of work, examples of which are specified below :-
Metal turning Full time up to amaximum of two years.
Brass finishing Full time up to amaximum of one year.
Roiler making orrepairing of boilers Full time up to amaximum of one year.
Pattern making Full time up to amaximum of one year.
Planning,slotting, shipping and milling Full time up to amaximum of one year.
Tool room Full time up to amaximum of one year.
Approved schemesof training in the use of hand and small machine tools Smith work Full time up to amaximum of six months.
Coppersmith work Full time up to amaximum of six months.
Welding Full time up to amaximum of six months.
Work in drawingoffice as draughtsman or engineer engaged on arrangement, detailor design Full time up toone year. When more than one year has been spent in the drawingoffice, only half the additional time will count.
Electrical shop orrepair work not already covered above (excluding work of a minornature) Full time up toone year, additional at half rate. Maximum total 18 months.
[7-A. Holder of a sea-going Engine Driver's Certificate of Competency. [Inserted by G.S.R. 2703, dated 25th November, 1969]- A candidate who holds a sea-going Engine Driver's Certificate of Competency issued under Section 78 shall be eligible to appear at the Examination for Second Class Certificate of Competency subject to the following conditions, namely :
(a)that the candidate has performed workshop service of two years in a marine workshop or compensatory service at sea in accordance with rule 14 in lieu of the said two years of workshop service, and
(b)that he has completed in addition to the service mentioned in Cl. (a), the sea service as required under rule 15.]