Legal Document View

Unlock Advanced Research with PRISMAI

- Know your Kanoon - Doc Gen Hub - Counter Argument - Case Predict AI - Talk with IK Doc - ...
Upgrade to Premium
[Cites 0, Cited by 0] [Entire Act]

State of Rajasthan - Section

Section 58A in Rajasthan Factories Rules, 1951

58A. - (1) For the purpose of this rule, the expression "gas-holder" means a water-sealed gas-holder which has a storage capacity of not less than 141.5 cubic meters (500 C.ft.).

(2)Every gasholder shall be of adequate material and strength, sound construction and properly maintained.
(3)Where there is more than one gasholder in the factory, every such gasholder shall be marked in a conspicuous position with a distinguishing number or letter.
(4)Every gasholder shall be thoroughly examined externally by a competent person at least once in a period of twelve months.
(5)In the case of gasholder of which any lift has been in use for more than ten years. the internal state of sheeting shall, within one year of the coming into operation of these rules, and thereafter at least after every period of four years, be examined by a competent person by means of electronic or other accurate devices:Provided that if the Chief Inspector is satisfied that such electronic or other accurate devices are not available, he may permit the cutting of samples from the crown and the sides of the holder:Provided further that if the above inspection raises a doubt, an internal visual examination shall be made.
(6)All possible steps shall be taken to prevent or minimise ingress of impurities in the gasholder.
(7)No gasholder shall be repaired or demolished except under the direct supervision of person who, by his training, experience and knowledge of the necessary precautions against risks of explosion and of persons being overcome by gas, is competent to supervise such work.
(8)
(a)All sample discs cut under sub-rule (5) above, shall be kept readily available for inspection.
(b)A permanent register in Form 9-A duly signed by the occupier or manager shall be maintained giving the following particulars
(i)the serial number of gasholder vide sub-rule (3) above and the particulars of manufacture i.e. makers name, date of manufacture, capacity, number of lifts, pressure thrown by holder when full of gas:
(ii)the dates of inspection carried out as required under sub-rules (4) and (5) above and by whom carried out:
(iii)the method of inspection used:
(iv)date of painting. etc.
(v)nature of repairs and name of person carrying out repairs; and
(vi)remarks.
(c)The results of examinations by a competent person carried out under sub-rules (4) and (5) shall be entered in Form No. 9-B.
(d)A copy of the report in Form B shall be kept in the said register and both the register and the report shall be readily available for inspection.
Rule prescribed under sub-section (2) of section 34