rather on 14.8.2013, the car reported at the dealership with broken 'flywheel drive plate'. It was further stated that the function of flywheel ... transmit the power from the engine to the transmission through flywheel, which pushes the vehicle in forward direction. It was further stated that
checking, it was found that there was a problem in
flywheel of the car, due to rust. An estimate of Rs.50,000/-, despite ... charge the said amount,
as the defect in flywheel of the car had arisen, within the warranty period,
but to no avail, as a result
mechanic to find out the problem, the mechanic informed that the flywheel is producing the sound and the complete flywheel kit (flywheel along with clutch ... cost around Rs. 60-70,000/-, he also informed that generally the flywheel kit needs to be changed only when the vehicle is likely
increase wheel speed.
A brief literature may
be referred herein below on `Flywheels as well.
Flywheels (sometimes
called Flexplates) are used on engines equipped with
informed him
that the clutch plate, pressure including release bearing and flywheel were
found damaged. The complainant requested them to get inspected the damaged
parts
replaced the
parts in the vehicle such as pressure plate, clutch kit, Flywheel,
brake Clutch Fluid, gear box, clutch plate at free of cost
basis of
a complaint, the flywheel part of the vehicle was changed at the cost of
Rs.87,319 to the Complainant. However, the same ... Opposite Party No.1 in
working condition for replacement of the flywheel under warranty under
their advisement, however on 10.09.2011, the Opposite Party
issued job card No. JC15000663 and found problem
i.e. flywheel, cover Assy clutch and clutch disk and clutch plates
and Op No. 3 repaired ... demand of the complainant,
replaced the clutch set of the car alongwith flywheel. It was done
within the warranty period, therefore, no money was charged
Slave Cylinder, 4) Wo W-Oem Clutch Plate, 5) W-Oem Flywheel, 6) W- Oem Release Bearing.
क्लच और पुर्जो के प्रयोग के बारे
dismantled condition. On inspection, the expert would notice
that the flywheel side crank case was seen as welded. A ridge was also seen
