State of Andhra Pradesh - Act
Andhra Pradesh Engineering Common Entrance Test for diploma holders for admission into B.E., B.Tech. and B.Pharm Courses Rules, 2004
ANDHRA PRADESH
India
India
Andhra Pradesh Engineering Common Entrance Test for diploma holders for admission into B.E., B.Tech. and B.Pharm Courses Rules, 2004
Rule ANDHRA-PRADESH-ENGINEERING-COMMON-ENTRANCE-TEST-FOR-DIPLOMA-HOLDERS-FOR-ADMISSION-INTO-B-E-B-TECH-AND-B-PHARM-COURSES-RULES-2004 of 2004
- Published on 18 March 2004
- Commenced on 18 March 2004
- [This is the version of this document from 18 March 2004.]
- [Note: The original publication document is not available and this content could not be verified.]
1. Short Title, Commencement and applicability.
- (i) These rules may be called the 'Andhra Pradesh Engineering Common Entrance Test for diploma holders for admission into B.E., B.Tech. and B.Pharm Courses Rules, 2004'.2. Definitions.
- In these rules, unless the context otherwise requires: -(i)"Act" means the Andhra Pradesh Educational Institutions (Regulation of Admission and Prohibition of Capitation Fee) Act, 1983. (Andhra Pradesh Act No 5 of 1983).(ii)[ "Association of Colleges" means the Association of Private Un-Aided Professional Colleges formed for the purpose of conducting Engineering Common Entrance Test referred to in sub-rule (x) and recognised by Andhra Pradesh State Council of Higher Education consisting of Management representatives.] [Substituted by Notification No. G.O.Ms. 25, dated 28.2.2006 (w.e.f. 18.3.2004).](iii)"Chairman" means the Vice-Chancellor of any University in the State nominated by the Competent Authority for each academic year for conducting and discharging the functions as specified relating to Under Graduate Engineering, Pharmacy Courses through Engineering Common Entrance Test for Diploma Holders.(iv)"Committee of ECET-FDH" means the committee empowered to conduct (ECET-FDH) and to prepare the merit list of the candidates as per the marks obtained in the above test for enabling admission into Convener Seats and Management Seats in the Colleges which agree to make admission based on ranking in ECET-FDH into Under Graduate Engineering and Pharmacy Courses.(v)[ "Committee of ECET-FDH-AC" means the committee empowered by the Association of Private Un-Aided Professional Colleges to conduct ECET-FDH-AC for admission of Diploma Holders into 2nd year of Engineering and Pharmacy Courses and to prepare the merit lists of the candidates as per the marks obtained in the above test for admission in Engineering and Pharmacy Courses, subject to the supervision of the permanent committee.] [Substituted by Notification No. G.O.Ms. 25, dated 28.2.2006 (w.e.f. 18.3.2004).](vi)"Competent authority" means the Chairman of the Andhra Pradesh State Council of Higher Education.(vii)"Convener" means the authority/ officer appointed by the Competent Authority in consultation with Chairman for conducting the Engineering Common Entrance Test for Diploma holders and for performing such other functions relating to the said test as entrusted to him by the Competent Authority.(viii)[ "Convener Seats" means the seats in an institution to be filled by the Convener.] [Substituted by Notification No. G.O.Ms. 25, dated 28.2.2006 (w.e.f. 18.3.2004).](ix)"Engineering Common Entrance test for Diploma Holders" (herein after called ECET-FDH) means examination conducted for assigning ranks on merit to the candidates which will be the basis for admission into B.E., B.Tech and B.Pharm Courses in All India Council for Technical Education/ Pharmacy Council of India approved institutions for Diploma Holders.(x)[ "Engineering Common Entrance test for Diploma Holders conducted by Association of Colleges" (herein after called ECET-FDH-AC), means examination conducted by Association of Private Un-Aided Colleges for assigning rank to merit candidates which shall be the basis for admission of candidates to the said colleges in the State for filling up seats approved for Diploma Holders by the All India Council for Technical education/Pharmacy Council of India in their 2nd year B.E/B.Tech/B. Pharmacy courses.] [Substituted by Notification No. G.O.Ms. 25, dated 28.2.2006 (w.e.f. 18.3.2004).](xi)[ "Management Seats" means the seats to be filled by the Management of the Private Un-Aided Colleges for offering Courses under lateral entry 2nd year B.E./B.Tech./B. Pharmacy for Diploma Holders.] [Substituted by Notification No. G.O.Ms. 25, dated 28.2.2006 (w.e.f. 18.3.2004).](xii)"Permanent Committee" means the committee constituted by the Government to ensure that the ECET-FDH-AC conducted by the Association of Colleges is fair and transparent.(xiii)"Qualified Candidate" means the candidate who has appeared for the ECET-FDH/ECET-FDH-AC and has been assigned rank in the common merit list and has the eligibility as per the criteria laid down under Rule 3.(xiv)"Qualifying Examination" means the examination of the minimum qualification prescribed, appearance or passing of which entitles one to seek entry' into the relevant courses as laid down under Rule 3.(xv)"State Council" means the Andhra Pradesh State Council of Higher Education constituted under Andhra Pradesh State Council of Higher Education Act, 1988 (Andhra Pradesh Act 16 of 1988).(xvi)"University" means the University concerned in which the particular courses are offered.3. Eligibility Criteria for appearing the ECET-FDH/ECET-FDH-AC.
- Candidates satisfying the following requirements shall be eligible to appear for ECET-FDH/ECET-FDH-AC.4. The Engineering Common Entrance Test (Ecet-FDH).
- (i) The ECET-FDH shall be conducted by the Convener, and shall be held on such date and centers as may be specified by the ECET-FDH Committee.5. Subjects for Common Entrance Test.
- (i) Engineering:| (i) | Mathematics - | 50 Marks |
| (ii) | Physics - | 25 Marks |
| (iii) | Chemistry - | 25 Marks |
| (iv) | Engineering - | 100 Marks |
| (i) | Mathematics - | 50% (100 Marks) |
| (ii) | Analytical ability | 25% (50 Marks) |
| (iii) | Communicative English | 25% (50 Marks)] |
6. Preparation of the Merit List and Assigning ranks in ECET (FDH).
- The Convener shall observe the following rules in preparing the merit list and assigning the rank separately for Engineering and Pharmacy.7. Constitution of ECET-FDH Committee.
- The Competent authority shall constitute the ECET-FDH committee to deal with the matters connected with the test. The Composition of the Committee shall consist of the following: -8. Functions of the ECET-FDH Committee.
- The ECET-FDH Committee shall take decisions on the following issues relating to the ECET-FDH: -9. Functions of the Chairman of the ECET-FDH Committee.
- Chairman of the Committee10. Functions of the Convener of the ECET-FDH Committee.
- The Convener of the ECET-FDH shall, subject to such directions as may be issued by the Chairman discharge his duties in the matters relating to the ECET-FDH. The Convener, is specifically responsible for discharging the following functions:11. Funds for the conduct of the ECET-FDH.
- (i) The amounts that are collected from the candidates towards cost of the application and the examination fee shall be directly credited into the account of the Secretary, Andhra Pradesh State Council of Higher Education, Hyderabad.12. Engineering Common Entrance Test for Diploma Holders Conducted by Association of Colleges-ECET-FDH-AC.
13. Constitution of Committee of ECET-FDH-AC.
- The Committee of ECET-FDH-AC shall be constituted by the Association of Un-Aided Private Professional Colleges with eminent members and academicians representing all the disciplines included for the test. A member of this committee shall be appointed as Convener of the Committee of ECET-FDH-AC to discharge functions as assigned by the Committee of ECET-FDH-AC.14. Functions of Committee of ECET-FDH-AC.
- (i) ECET-FDH-AC shall be conducted in a fair and transparent manner subject to supervision of the permanent committee and it shall submit the proposed question papers, the names of the paper setter and examiners and the method adopted to ensure papers are not leaked, whenever such information is called for by the permanent Committee.15. Funds for the conduct of ECET-FDH-AC.
- The amounts that are collected from the candidates towards cost of application and examination fee shall be utilized to meet the expenditure for items/ services connected with the ECET-FDH-AC. Accounts shall be subjected to audit and report thereof shall be submitted to the competent authority and Permanent Committee.16. Special Direction from the Government.
- (i) In the event of any malpractice or leakage of question paper or in any other circumstances leading to the stopping of ECET-FDH as scheduled, the Government may for the reasons to be recorded in writing, direct to conduct of a re-examination of the ECET-FDH. In such an event the Andhra Pradesh State Council of Higher Education or any other body so nominated by the Government shall cause the ECET-FDH Re-examination to be conducted by appointing/ nominating such functionaries or committees as considered necessary, without levying any extra charge from the candidates for this purpose.| SI.No. | Name of the Degree course offered in EngineeringColleges | Corresponding Diploma course eligible foradmission | Course in which the candidate has to appear forECET examination to be considered for admission into relevantdegree programmes as in column (2) |
| (1) | (2) | (3) | (4) |
| 1. | Civil Engineering (CE) | 1. Diploma Engineering | |
| 2. | Civil Environment Engg. | 2. Diploma in Construction Tech. | Civil Engg. |
| 3. | Mechanical Engineering (ME) | 1. Diploma in Mechanical Engg. | |
| 4. | Production Engineering (PE) | 2. Diploma in Automobile Engg. | |
| 5. | Industrial Production Engg. (IPE) | 3. Diploma in Mechanical Engg. (SW) | |
| 6. | Mechanical, Production and Industrial Engg.(MPIE) | 4. Diploma in Packaging Tech. | Mechanical Engineering |
| 7. | Mechanical and Marine Engg. (MME) | 5. Diploma in Printing Tech. | |
| 8. | Aircraft Maintenance Engg. | 6. Diploma in Jewellery Design andManufacturing | |
| 9. | Mechanical Engineering (Mechatronics) | 7. Diploma in Software Technology | |
| 9A. [ [Added by Notification No. G.O.Ms. 25, dated 28.2.2006 (w.e.f. 18.3.2004).] | Automobile Engineering | 7. Diploma in Automobile Engineering] | |
| 10. | Instrumentation Engg. (IE) | 1. Diploma in Applied Electronics andInstrumentation. | Electronics & Instrumentation Engineering |
| 11. | Electronics & Instrumentation Engg. (EIE) | 2. Special Diploma in Industrial Electronics &Instrumentation Engg. | |
| 12. | Applied Electronics and Instrumentation Engg. | 3. Diploma in Electronics and InstrumentationEngg. | |
| 13. | Instrumentation and Control Engg. | ||
| 14. | Electrical and Electronics Engg. (EEE) | 1. Diploma in Electrical and ElectronicsEngineering | Electrical and Electronics Engg. |
| 15. | Electronics and Communication Engg. (ECE) | 1. Diploma in Electronics and CommunicationEngg. | |
| 2. Diploma in Electronics and Engg. | |||
| 16. | Electronics and Control Systems Engg.Instrumentation Engg. | 3. Diploma in Applied Electronics andInstrumentation | |
| 17. | Electronics and Telematics | 4. Special Diploma in Electronics inCommunication Engg. | |
| 5. Special Diploma in Electronics in IndustrialElectronics and Instrumentation Engg. | |||
| 6. Special Diploma in T.V. and Sound Technology | Electronics and Communication Engineering | ||
| 7. Special Diploma in Bio-Medical Engineering | |||
| 8. Diploma in Bio-Medical Engg. Electronics andCommunication Engineering | |||
| 18. | Computer Science and Engg. (ECSE) | 1. Diploma in Computer Engineering | |
| 19. | Computer Science and Systems Engg. | 2. Diploma in information Tech | Computer Science and Engineering |
| 20. | Information Technology | 3. Special Diploma in Electronics withspecialization in Computer Engineering | |
| 21. | Electronics and Computer Engg. | 4. Diploma in Electronics and ComputerEngineering | |
| 21A. [ [Inserted by Notification No. G.O.Ms. No. 19, dated 2.2.2008 (w.e.f. 18.3.2004).] | Geo Informatics | - | -] |
| 21B. [ [Inserted by Notification No. G.O.Ms. No. 19, dated 2.2.2008 (w.e.f. 18.3.2004).] | Ceramic Technology | Diploma in Ceramic Technology | Ceramic Technology] |
| 22. | Chemical Engineering | 1. Diploma in Chemical Engg. (SW) | |
| 2. Diploma in Chemical Engg. (SW) (Plastics andPolymers) | |||
| 3. Diploma in Chemical Engg. (SW) (PetroChemicals) | |||
| 4. Diploma in Chemical Engg. (SW) (OilTechnology) | Chemical Engineering | ||
| 5. Diploma in Sugar Tech (SW) | |||
| 6. Diploma in Textile Technology | |||
| 7. Diploma in Leather Tech (SW) | |||
| 8. Diploma in Ceramic Tech (SW) | |||
| 23. | Metallurgy (MET) | ||
| 24. | Metallurgy and Material Science (Met and MS) | Diploma in Metallurgy | Metallurgy |
| 25. | Mining Engineering (MIN) | Diploma in Mining Engineering | Mining |
| 26. | Textile Technology (TT) | 1.Diploma in Textile Tech (SW) | |
| 2. Diploma in textile Tech. (Design andManufacturing) | Chemical Engineering | ||
| 3. Diploma in Textile Tech. (Knitting) | |||
| 27. | Bio-Medical Engineering | 1. Diploma in Bio-Medical Engg. | Electronics and Communication Engg. |
| 2. Special Diploma in Bio-Medical Engg. | |||
| 28. | Pharmacy | Diploma in Pharmacy | Pharmacy |
| 29. | Bio-Technology | 1.Diploma in Bio-technology | |
| 2.Diploma in Pharmacy | |||
| 3. Diploma in Chemical Engineer., | Bio-Technology |