Union of India - Act
The Marble Development And Conservation Rules, 2002
UNION OF INDIA
India
India
The Marble Development And Conservation Rules, 2002
Rule THE-MARBLE-DEVELOPMENT-AND-CONSERVATION-RULES-2002 of 2002
- Published on 15 May 2002
- Commenced on 15 May 2002
- [This is the version of this document from 15 May 2002.]
- [Note: The original publication document is not available and this content could not be verified.]
16.
/751G.S.R. 369(E), dated 15th May, 2002. - In exercise of the powers conferred by section 18 read with sections 21 and 26 of the Mines and Minerals (Development and Regulation) Act, 1957 (67 of 1957), the Central Government hereby makes the following rules for conservation and systematic development of and scientific mining to conserve the marble resources and to provide a uniform framework with regard to systematic and scientific exploitation of marble throughout the country, namely:-Chapter I
Preliminary
1. Short title and commencement.
2. Application.
- These rules shall apply to prospecting and quarrying or mining of marble.3. Definitions.
Chapter II
Prospecting and Mining of Marble
4. Prospecting to precede mining operations.
- No lease shall be granted by the State Government unless it is satisfied that there is evidence to show that the area for which the lease is applied for, has been prospected earlier for marble or the existence of marble therein has been established otherwise.5. Period for which prospecting license may be granted.
- The period for which a prospecting license may be granted shall not exceed two years.6. Period for which leases may be granted.
- The maximum period for which a lease may be granted shall not exceed thirty years:Provided that the minimum period for which any such lease may be granted shall not be less than twenty years.7. Minimum and maximum area for grant of a mining lease.
Chapter III
Prospecting Operations
8. Scheme of prospecting.
9. Modification of scheme of prospecting.
10. Prospecting operations to be carried out in accordance with scheme of prospecting.
11. Report of prospecting operations.
- Every holder of a prospecting license for marble shall submit to the State Government or any person authorised in this behalf by that Government an annual report in Form A so as to reach it or him, as the case may be, by 30th April for the previous year:Provided that a report in Form A shall be submitted within a period of three months after the completion or abandonment of the prospecting operations or the expiry of the prospecting license, whichever is earlier.Chapter IV
Mining Plan
12. Mining plan as a pre-requisite to the grant of lease.
13. Mining plan to be prepared by a recognised person.
14. Grant of recognition by State Government.
15. Approval and submission of mining plan.
- On receipt of the application for grant of mining lease for undertaking mining operations for marble, the State Government shall take decision to grant precise area for the said purpose and communicate such decision to the applicant and on receipt of the communication from the State Government of the precise area to be granted, the applicant shall submit a mining plan within a period of three months from the date on which such communication is received or such other period as may be allowed by the State Government for approval and the said mining plan shall incorporate-Chapter V
Mining Operations
16. Mining plan as a pre-requisite to the commencement of mining operations.
17. Mining plan to be submitted by the existing lessee.
18. Review of mining plan.
19. Mining operations to be in accordance with mining plan.
20. Prospecting and mining operations.
- The prospecting and mining operations shall be carried out in such a manner so as to ensure systematic development and conservation of marble deposits and protection of environment.21. System of working.
| (a) | For small quarry or mine (having area upto one hectare): | |||
| (i) | Compressor | ... | one | |
| (ii) | Jackhammer or any other pneumatic or hydraulic drill | ... | one | |
| (iii) | Chain pulley block | ... | one | |
| (iv) | Winch or 8 to 10 tonnes capacity crane | ... | one | |
| (v) | Wedges, chisels and hammers as needed | ... | ||
| (vi) | Water pump | ... | one | |
| (b) | For medium size quarry or mine (having area above one hectareand upto three hectares): | |||
| (i) | Compressors | ... | two | |
| (ii) | Jackhammer or any other pneumatic or hydraulic drill | ... | as needed | |
| (iii) | Mobile cranes (15 to 20 tonnes) | ... | one to two | |
| (iv) | Derrick crane or Loader | ... | one | |
| (v) | Excavator (0.3 cu.m. to 0.9 cu.m.) | ... | one | |
| (vi) | Tippers or Loaders | ... | two | |
| (vii) | Wire saws or chain saws | ... | as needed | |
| (viii) | Hydraulic jacks | ... | as needed | |
| (c) | For large quarry or mine (having area more than threehectares): | |||
| (i) | Compressors | ... | three to four | |
| (ii) | Mobile cranes (15 to 20 tonnes) | ... | as needed | |
| (iii) | Derrick crane (20 to 40 tonnes) or Loader | ... | as needed | |
| (iv) | Excavator (0.9 cu.m. to 1.1 cu.m.) | ... | as needed | |
| (v) | Tippers or Loaders excavator | ... | two for each | |
| (vi) | Wagon drills | |||
| (vii) | Slot liners | ... | as needed | |
| (viii) | Line drilling machines | |||
| (ix) | Diamond wire saws | |||
| (x) | Chain saws or diamond belt saws | |||
| (xi) | Hydraulic jacks |