State of Andhra Pradesh - Act
Andhra Pradesh Regulation of Admissions into Post Graduate Engineering Including Technology/Pharmacy/ Architecture and Planning Courses (through Graduate Aptitude Test in Engineering and Common Entrance Test) Rules, 2007
ANDHRA PRADESH
India
India
Andhra Pradesh Regulation of Admissions into Post Graduate Engineering Including Technology/Pharmacy/ Architecture and Planning Courses (through Graduate Aptitude Test in Engineering and Common Entrance Test) Rules, 2007
Rule ANDHRA-PRADESH-REGULATION-OF-ADMISSIONS-INTO-POST-GRADUATE-ENGINEERING-INCLUDING-TECHNOLOGY-PHARMACY-ARCHITECTURE-AND-PLANNING-COURSES-THROUGH-GRADUATE-APTITUDE-TEST-IN-ENGINEERING-AND-COMMON-ENTRANCE-TEST-RULES-2007 of 2007
- Published on 22 September 2007
- Commenced on 22 September 2007
- [This is the version of this document from 22 September 2007.]
- [Note: The original publication document is not available and this content could not be verified.]
1. Short title, applicability and commencement.
- (i) These rules may be called the Andhra Pradesh Regulation of Admissions into Post Graduate Engineering Including Technology/Pharmacy/ Architecture and Planning Courses (through Graduate Aptitude Test in Engineering and Common Entrance Test) Rules, 2007.2. Definitions.
3. Allotment of Seats.
(a)The seats allotted in each University, Un-aided Non-Minority and Minority Professional Institution under these rules for admission of candidates shall be classified as:4. Eligibility Criteria for Admission.
- The eligibility criteria for Admission into Post Graduate courses in Engineers including Technology / Pharmacy / Architecture and Planning shall be as mentioned below:5. Method of Admission.
- The general guidelines for the admission of candidates into Professional Institutions offering Post Graduate Engineering, including Technology / Pharmacy/ Architecture and Planning Courses, shall be as follows:-6. Procedure of Admissions.
- (i) Each Unaided Minority Institution, which has opted for PGECET under Clause (iv) of sub rule (a) in Rule 11 of the Andhra Pradesh Post Graduate Engineering including Technology/ Pharmacy/Architecture and Planning Courses Common Entrance Test Rules, 2007 shall indicate in writing to AFRC by a cut-off date specified by it, as to whether the Institution would admit students through the Single Windows System to be operated by the Convener of PGECET admissions (PGECET Window) or the Convener of PGECET-AC admissions(PGECET-AC Window).(ii)The procedure for admission of candidates through the single windows operated by the conveners of PGECET and PEGCET-AC shall be as follows:(a)To Fill Up Category-A Seats (80%) In University Colleges And Unaided Non-Minority Institutions Which Opted For PGECET And Unaided Minority Institutions Which Have Opted For PGECET And PGECET-Window:7. Rules of Reservation for admission.
- All the seats in the University colleges and Category A seats in Unaided Non-Minority/Minority Institutions offering Post Graduate Engineering, including Technology/ Pharmacy/Architecture and Planning Courses shall be reserved, to the following categories in Admissions:(i)Region-wise reservation of seats. - Admission to 85% of the seats in each course shall be reserved for the local candidates and the remaining 15% of the seats shall be unreserved seats as specified in the Andhra Pradesh Educational Institutions (Regulations and Admissions) Order, 1974 as subsequently amended.Explanation. - For purpose of these rules,(a)Local Areas means. - (1) The part of the State comprising the districts of Adilabad, Hyderabad (including Twin Cities) Ranga Reddy, Karimnagar, Khammam, Medak, Mahaboobnagar, Nalgonda, Nizamabad and Warangal shall be regarded as the Local Area for the purpose of admission to the Osmania University, Kakatiya University, Telangana University and Nalgonda University and to any other educational institutions (other than State wide University or State wide educational institution) which is subject to the control of the State Government and is situated in that part.| Group 'A' | - | 70% |
| Group 'B' | - | 10% |
| Group 'C' | - | 1% |
| Group 'D' | - | 7% |
| Group 'E' | - | 4% |
8. Fee for Professional Institutions offering Post Graduate Engineering, including Technology/ Pharmacy/ Architecture and Planning Courses courses.
- (i) "The fee payable per student per annum for each discipline in each institution shall be as fixed by the AFRC.| SI.No. | Name of the Discipline | Courses | Eligibility |
| (1) | (2) | (3) | (4) |
| 1 | M.Tech.(Civil Engineering.) | TransportationEngineering Structural EngineeringGeo -Environmental Engineering | B.E./B.Tech./AMIE in Civil Engineering/Construction Engineering (or) equivalent |
| Computer AidedStructural EngineeringWater Resources Engineering | |||
| Soil Mechanics and Foundation Engineering | |||
| Structural Systems and Design (StructuralEngineering) | |||
| Geo technical Engineering | |||
| Hydromechanics and Water Management | |||
| Environmental Engineering | |||
| Hydraulics, coastal and Harbour Engineering | |||
| Environmental Engineering and Management | |||
| Structural Engineering and Natural DisasterManagement | |||
| Construction Technology and Project Management | |||
| 2 | M.Tech. (Electrical and Electronics Engineering.) | Electrical Power Systems | B.E./B.Tech./AMIE in Electrical Engineering (or)Equivalent |
| Power and Industrial Drives | |||
| Electrical Power Engineering | |||
| Power Electronics | |||
| Advanced Power Systems | |||
| Electrical Power | |||
| Systems and High Voltage | |||
| Power Systems (High Voltage) | |||
| Power Electronics and Electric Drives | |||
| Power System Control and Automation | |||
| Power Electronics and Drives | |||
| Industrial Drives and Control | |||
| Power Systems | |||
| Power Systems and Power Electronics | |||
| Power Electronic Systems | |||
| Power System Operation and control | |||
| Computer aided Power Systems | |||
| Power Systems Engineering | |||
| Power Systems and Automation | |||
| Control Systems | |||
| 3 | M. Tech. (Mechanical Engineering.) | Refrigeration and Air Conditioning | B.E./B.Tech./AMIE in Mechanical EngineeringAutomobile Engineering Mechanical Engineering (Mechatronics),Mechanical Engineering (Production Engineering), AeronauticalEngineering Industrial Engineering Production EngineeringIndustrial and Production Engineering Marine Engineering (or)equivalent |
| Advanced Manufacturing Systems | |||
| Thermal Engineering CAD / CAM | |||
| Machine Design | |||
| Industrial Engineering and Management | |||
| Design for manufacturingDesign and Manufacturing | |||
| Production EngineeringTurbo-Machinery | |||
| Automation and Robotics | |||
| Advanced Design and Manufacturing | |||
| Industrial Engineering | |||
| Thermal Sciences and Energy Systems | |||
| Computer Integrated Manufacturing | |||
| 4 | M.Tech. (Electronics and Communication Engineering) | Digital Electronics and Communication | B. E./B.Tech./AMIE in ECE, AMIE (Electronics andTelecommunication Engineering)/ AMIETE (Electronics andTelematics Engineering) |
| Systems and Signal Processing | B.E./B.Tech. Degree in Electrical andElectronics | ||
| Computers and Communications VLSI System Design | Engineering, EIE, and Bio-Medical Engineering(or) Equivalent | ||
| Digital Electronics and Communication SystemsDigital Systems | |||
| Microwave and Radar Engineering | |||
| Communications Engineering Embedded Systems andVLSI Design | |||
| Electronics Instrumentation and CommunicationSystems | |||
| Communications and Signal Processing | |||
| Communication and Radar Systems | |||
| Microwave Engineering Electronics andInstrumentation | |||
| 5 | M.Tech. (Computer Science) | Computer Science | B.E./B.Tech./AMIE in any branch ofEngineering/Tech. (or) equivalent |
| Computer Science and Engineering | Master's Degree in Physics, Statistics,Mathematics or Applied Mathematics, Applied Statistics, AppliedPhysics, Geophysics, M.Sc. (Comp. Sc.), M.Sc. (InformationSystems)(Computer Applications and Electronics) and 1 MCA(or)Equivalent | ||
| Software Engineering | |||
| Computer Science Engineering | |||
| Computer Science and Technology | |||
| Information TechnologyComputer Networks | |||
| Artificial Intelligence and Robotics | |||
| 6 | M.Tech. (Bio-Technology) | Bio-Technology | B.E./B.Tech./AMIE: Chemical Engg./Bio-Technology/ Biochemical Engg./ Bio-informatics / Env.Sciences / Agricultural Engg. |
| Or | |||
| M.Sc. in Chemistry/ Biochemistry/Micro Biology/Bio technology/Life Sciences / B.V.Sc/ M.B.B.S./ B.Pharmacy /Food Technology | |||
| 7 | M E.(Biomedical Engineering) | Bio-Medical ElectronicsBio-medical Engineering | B.E./B.Tech./AMIE in Biomedical Engineering orECE or EEE or EIE or equivalent |
| B.E./B.Tech./ B.Pharm of AU or its equivalentAMIE and AMIETE | |||
| 8 | M.Tech. (Chemical Engineering) | Chemical EngineeringCAD in Chemical Engineering | B.E./B.Tech./AMIE in Chemical Engg. B.E./B.Tech.Chemical Engineering/ AMICHE, AMIE (CHEM) (of) Equivalent |
| Industrial PollutionControl EngineeringMineral Process Engineering | |||
| 9 | M. Pharmacy | Pharmaceutics | B. Pharmacy |
| Pharmacology | |||
| Pharmaceutical Chemistry | |||
| 10 | M.Tech. | Remote Sensing | B.E./B.Tech. in any of the following branches(a) Civil Engg. (b) Computer Sc. And System Engg., ECE, B.Sc.(Agriculture), M.Sc. (Tech.)/M.Sc.degree in any of the followingbranches a) Geophysics, b) Meteorology and Oceanography (of)Equivalent |
| 11 | M.Tech. | Geo-Engineering | M.Sc. (Geophysics)/ B . E . / B.Tcch. in CivilEngineering |
| 12 | M.Tech. | Industrial Engineering | Any graduate of B.E./B.Tech. and AMIE |
| 13 | M.Tech. | Electronics and Instrumentation | B.E./B.Tech. in ECE, EEE, EIE, AMIE / AMIETE(or) Equivalent |
| 14 | M.Tech. | Nano Technology | B.E/B.Tech. any branch (except Civil,Architecture and Geo - Engineering) (or) Equivalent |
| 15 | M.E. | Marine Engineering and Mechanical Handling | B.E./B.Tech./AMIE in Mechanical and MarineEngineering/ IPE or Equivalent |
| 16 | M.Tech. | Industrial Metallurgy | BE (Metallurgy)/ BE(Mech.) and B.E. (Marine) or its equivalent Diploma holder withAMIE (Mech. and Mett)andAMHM qualified in GATE |
| 17 | M.Tech | Industrial Process Instrumentation | B.E./B.Tech. (Inst. Tech., E and I) M.Sc.(Tech.)/M.Sc. Applied Physics / M.Sc. Instrumentation or itsequivalent except AMIE |
| 18 | M. Plan | Planning | B.Arch/B.E./B.Tech. in Civil Engineering |
| 19 | M.Tech. | Energy Systems | B.E./B.Tech./AMIE in MEC/EEE/ Chem.Engg. (or)Equivalent |
| 20 | M.Tech. | A Digital Systems and Computer Electronics EmbeddedSystems | B.E./B.Tech./AMIE in ECE/EEE/CSE/ Electronicsand Computers Engg./ ETE/IT/ CSIT / Electronics and ControlEngg./ Instrumentation Engg./ Instrumentation Technology / EIE /Electronics Engg./ Instrumentation and Control Engg.,/Bio-Medical Engg./ AMIETE and Electronics and Telematics Engg.(or) Equivalent |
| 21 | M.Tech. | Information TechnologySoftware Engineering | B.E./B.Tech./AMIE in CSE/CSIT/ Electronics andComputers Engg./IT and Computer Science and Systems Engineering(or) Equivalent |
| 22 | M.Tech. | Environmental Management Environmental Geomantic | B.E./B.Tech./AMIE in Civil/ Mechanical/Chemical/ECE/ EEE/ Environmental Engg./ Geo informaticsEngg./Metallurgy Engg. /Computer Science/ InformationTechnology/CSIT /Agricultural Engg./ Industrial Engg./ BiomedicalEngg. |
| Or | |||
| M.Sc in Mathematics/ Hydrology/ Physics/Chemistry/ Geology/Geo Physics/ Geography/ Biological Sciences /Environmental Sciences and Technology/ Agriculture/ AtmosphericSciences. | |||
| 23 | M.Tech. | Spatial InformationTechnology | B.E./B.Tech./AMIE: Civil/Mechanical/ Chemical/Computer Science/ Agriculture Engg |
| Geo-informatics and Surveying Technology | |||
| Or | |||
| Master's Degree in Geology/ Geophysics /Geography/ Mathematics/ Physics/ Chemistry/ EnvironmentalSciences/ Hydrology'/ Watershed Management | |||
| 24 | M.Tech. | Water and Environmental Technology | B.E./B.Tech./AMIE: Civil / Mechanical/ Chemical/Computer Science/ Agriculture Engg. |
| Or | |||
| Master's Degree in Geology/ Geophysics/Geography/ Meteorology/ Mathematics/Physics/ Chemistry/Environmental Sciences/ Hydrology/ Watershed Management | |||
| 25 | M.Arch. | Architectural Conservation | B.Arch. / Associate of Indian Institute ofArchitecture |
| Architecture in Interior Design | |||
| 26 | M.U.R.P. | M.U.R.P. | B.Arch./B.E./ B.Tech./AMIE in Civil; Master'sDegree in Geography/ Economics/ Sociology |
| 27 | M.Tech. | Control Engineering Instrumentation and Controls | B.E./B.Tech./AMIE in EEE/ECE/ Electronics andInstrumentation Engg. / Electronics and Control Engg./Electronics and Computers Engg./Instrumentation Engg./Instrumentation Technology/ Electronic Engg./ Instrumentation andControl Engg./ Bio-Medical Engg./ Electronics and TelematicsEngg. |